Modifying And Deleting Steps; Copying A Program; Exporting A Program; Importing A Program From A Usb Drive - Ametek Reichert Phoroptor VRx User Manual

Instrument Setup
Programs
(continued)

Modifying and Deleting Steps

1. Tap the step to be modified or deleted in the Program Listing panel.
2. Make any desired changes to the selected Mode, Eye, or Chart.
3. Tap Modify or Delete in the menu bar at the bottom of the screen.
4. When modifications are complete, tap Save to save any changes made to the program.
Note: Tapping Exit without first tapping Save ignores any changes made in the Programs screen. Be
sure to save any changes.

Copying a Program

Copying and pasting a program is a fast and easy way to create multiple programs that are similar to
each other. Copy duplicates an existing program which can then be modified to create a unique program.
4. Tap the number of the program to be copied in the Program Selection panel.
5. Tap Copy in the menu bar at the bottom of the screen.
6. Tap the number of the program to paste the copied program into.
7. Tap Paste in the menu bar.
8. Make changes, then tap Save on the menu bar at the bottom of the screen to save the program.
Note: The copied program replaces any previously existing steps in the selected program.

Exporting a Program

Programs can be exported onto a thumb drive and then imported into another Phoroptor VRx. This is a
fast way to have the same programs put on multiple Phoroptor VRx units.
1. Insert a blank USB drive into the side of the controller.
2. Tap Export in the menu bar at the bottom of the screen.
3. The currently selected program will be exported.
Note: The exported program is identified by the program number. Exporting programs from a USB
drive overwrites any programs on the Phoroptor VRx with the same program number.

Importing a Program From a USB Drive

1. Insert the USB drive that has the exported programs on it.
2. Select a program number to import.
Note: A program will only import to the same program number. (e.g., Program 1 from one Phoroptor
VRx will only import into Program 1 of another Phoroptor VRx unit).
3. Tap Import in the menu bar at the bottom of the screen. The program is automatically imported into
the selected program.
4. Tap Save on the menu bar at the bottom of the screen to save the imported program.
16241-101 Rev. E
(continued)
39