Printer - Ametek Reichert Phoroptor VRx User Manual

Instrument Setup

Printer

1. Tap Settings, located at the top right of the Controller screen.
2. Tap Ports on the Settings menu.
3. In the Port Selection panel, tap Printer. Refer to Figure IS-27.
4. In the Port Settings panel, select the MCP1000. Refer to Figure IS-27.
5. Connect an MCP1000 printer to the system with a cable or Bluetooth dongle.
a. Refer to the Connecting with Cables section if connecting with a cable.
b. Refer to the Connecting with Bluetooth Dongles section if connecting with Bluetooth.
6. Select the Device driver in the Ports Settings panel and tap Apply.
7. Select the data to print in the Output Options in the
Settings menu, in the lower right corner of the screen.
Refer to Figure IS-26. The data printing options
include:
• Subj, AR, and LM values
• Visual Acuity, FCC, NRA/PRA, Accommodation,
Phoria, and Vergence value
The Print Format drop-down list options include:
• Far •
• Near •
16241-101 Rev. E
(continued)
Far/Near
Far/Add
Figure IS-27, Printer Settings
Figure IS-26, Printing Options
21