Ametek Reichert Phoroptor VRx User Manual page 18

Instrument Setup
Connecting With Bluetooth USB (ClearChart 4 Series Only) (continued)
Note: If the desired Bluetooth
USB device is not found,
tap the Discover button
again.
11. Once the Bluetooth address is
displayed, select the address
that matches the address on the
ClearChart and tap Pair. (Tap-
ping Apply is not needed.) Refer
to Figure IS-21.
12. Press the Menu button on the
ClearChart remote to exit the
menu.
Note: The Phoroptor VRx
will only display
'Initializing Device' until
the ClearChart menu
is exited. Once the
ClearChart is displaying
a chart, only then can
the Bluetooth connect
and Connected will
appear. Refer to Figure
IS-22 .
13. If pairing is unsuccessful, check
all the connections and repeat
the steps in this section.
18
(continued)
Figure IS-22, ClearChart Connected
Figure IS-21, USB Address & Pair
16241-101 Rev. E