Entering Data Manually - Ametek Reichert Phoroptor VRx User Manual

Performing an Exam
Data Input
(continued)

Entering Data Manually

1. Tap the drop-down list in the main display area to open a
list of different data sets. Refer to Figure PE-06.
2. Select the type of data to enter. To enter auto refractor
data, tap the AR option in the drop-down list or press the
AR button. To enter lensmeter data, tap the LM option in
the drop-down list or press the LM button.
3. The data set is unlocked if it has not been used. If the data
set has already been used, to change it, first tap Unlock at
the top left of the title bar. Refer to Figure PE-05.
4. Turn the CONTROL KNOB to enter the values for the data
fields (Sphere, Cylinder, Axis, Add etc.).
5. Press the CONTROL KNOB to move to the next data field.
6. Tap Lock, after entering all the data for the left and right
eyes to save the Auto Refractor data.
7. Repeat the above steps to enter other types of data.
8. Turn the CONTROL KNOB to begin changing Subjective data. The main measurement area title
automatically changes to Subjective.
Note: To delete any of the data entered manually, tap the data field and tap or press CLEAR.
44
(continued)
Figure PE-06, Data Input Drop-Down List
Unlock Icon
Figure PE-05 Lock/Unlock
16241-101 Rev. E