Ametek Reichert Phoroptor VRx User Manual page 37

Instrument Setup
Settings
(continued)
Output Options
CVD (Corneal Vertex Distance)
The subjective refraction data sent to EMR and the printer is adjusted according to the selected vertex
distance. The CVD of the Phoroptor VRx head is 16mm and the values displayed in the main data area
are shown using that CVD. The subjective refraction data sent to EMR and the printer is adjusted ac-
cording to the vertex distance selected here.
• 0 mm
• 12 mm
• 13.5 mm
• 16 mm
• 18 mm
Reset Exam
When "On", this will automatically clear the exam data after an exam is exported.
EMR Settings
Which data to send to an EMR system:
• Subj (Subjective)
• AR (Auto Refractor) (Not needed in two-way EMR communication.)
• LM (Lensmeter) (Not needed in two-way EMR communication.)
Autoload
Determines which refraction information to start the refraction with.
• None - Does not autoload pre-test data
• AR - Autoloads the autorefractor data
• LM - Autoloads the lensmeter data
• REF - Autoloads the imported refraction data
Printer Section
• Far (prints only distance vision)
• Near (prints only near vision)
• Far/Near (prints distance and near vision)
• Far/Add (prints distance and near vision addition)
In the first column, select which datasets should be printed: Subj, AR, and/or LM. In the second column,
select which test results should be printed: Visual Acuity, FCC (Fused Cross Cylinder), NRA/PRA, ACC
(Amplitude of Accommodation), Phoria, and/or Vergence.
16241-101 Rev. E
(continued)
37