Connecting With Bluetooth Usb (Clearchart 4 Series Only) - Ametek Reichert Phoroptor VRx User Manual

Instrument Setup

Connecting With Bluetooth USB (ClearChart 4 Series Only)

Reichert has a Bluetooth USB op-
tion to connect a ClearChart 4, 4X,
or 4P to the Phoroptor VRx. In order
to establish wireless communications
between the Phoroptor VRx and a
ClearChart, the Projector port must
first be paired to the Bluetooth USB
adapter.
1. Ensure the ClearChart is turned
off before pairing.
2. Tap Settings, located at the top
right of the Controller screen.
3. Tap Ports on the Settings menu.
4. In the Port Selection panel, tap
Projector.
5. In the Port Settings panel, select
the ClearChart model from the
device list.
Note: The Bluetooth USB is only
compatible with the ClearChart 4,
4X or 4P.
6. Set the Connection Type to Blue-
tooth (USB). Refer to Figure IS-19.
7. Install the Bluetooth USB into the
ClearChart.
8. Turn the ClearChart ON.
Note: The Bluetooth USB must be
installed in the ClearChart before the ClearChart is powered ON or the Bluetooth USB will not be
paired properly.
9. Press the Menu button on the ClearChart remote and view the Bluetooth address in the lower right
corner of the ClearChart. Refer to Figure IS-20.
10. Tap Discover on the Ports page and the Phoroptor VRx will search for all available ClearChart Digi-
tal Acuity Systems. Refer to Figure IS-19.
16241-101 Rev. E
(continued)
Figure IS-19, Device & Connection Type
Figure IS-20, Bluetooth Address
17