The Basics; Eye Selection; Selecting A Data Field - Ametek Reichert Phoroptor VRx User Manual

Performing an Exam
(continued)

The Basics

Eye Selection

Press the R, L, or B button to open the apertures for the right eye, left eye, or both eyes, respectively .
The aperture for the inactive eye automatically closes during refraction. The default setting for the open
aperture at the start of a new exam is selected in the Setup Menu.
Figure PE-08, Values Table

Selecting a Data Field

When adjusting sphere, cylinder, axis, etc., they can be selected using the touch screen or the controller
buttons.
Tap the center column (S, C, A, Add, Prism) to activate both the left and the right eyes for that field. Tap
the box to the left or right of the center column to activate only the left or right eye, respectively.
Press the B button, then the corresponding letter (S, C, A, Add, Prism) to activate both the left and the
right eyes for that field. Press the R or L button, then the corresponding letter (S, C, A, Add, Prism) to
activate only the left or right eye, respectively.
The yellow highlighted field indicates the adjustable value.
46 16241-101 Rev. E