Ametek Reichert Phoroptor VRx User Manual page 12

Instrument Setup
Connecting the Phoroptor VRx System
1. Align the pins in the Phoroptor Cable with the Phoroptor head.
Refer to figure IS-03.
2. Connect the cable by turning the metal collar clockwise until it
is fully secure. Refer to figure IS-04.
3. Connect the other end of the Phoroptor Cable to the Phoroptor
port in the Central Unit. Refer to Figure IS-05.
4. Connect the built-in cable on the Controller to the Controller
port on the Central Unit.
5. Connect the Power Cord to the Central Unit, then plug in the
power cord to an outlet providing appropriate voltage. Turn the
unit on by turning the ON/OFF switch to ON.
6. Connect the Projector to the Projector port on the Central Unit
in one of the following ways.
a. Refer to the Connecting with Cables section if connecting
with cable.
b. Refer to the Connecting with Bluetooth Dongles section if
connecting with Bluetooth.
c. Refer to the Connecting With Bluetooth USB (ClearChart 4
Series Only) section if connecting with Bluetooth USB.
7. Connect Lensmeters or Auto Refractors to the Instrument 1 or
Instrument 2 ports on the Central Unit in one of the following
ways.
a. Refer to the Connecting with Cables section if connecting
with cable.
b. Refer to the Connecting with Bluetooth Dongles section if
connecting with Bluetooth.
8. Connect a computer to the EMR port on the Central Unit in one
of the following ways. Refer to the EMR Setup section for setup
instructions.
a. Refer to the Connecting with Cables section if connecting
with cable.
b. Refer to the Connecting with Bluetooth Dongles section if
connecting with Bluetooth.
9. If needed, connect the Transfer port to another Phoroptor VRx
in one of the following ways to send data from one device to
another. Refer to the Daisy Chaining Multiple Phoroptor VRx's
section for instructions.
a. Refer to the Connecting with Cables section if connecting
with cable.
b. Refer to the Connecting with Bluetooth Dongles section if
connecting with Bluetooth.
c. Refer to the Connecting with Internal Bluetooth section if
connecting with Bluetooth.
12
(continued)
(continued)
Figure IS-03, Phoroptor Cable
Figure IS-04, Phoroptor Connected
Figure IS-05, Phoroptor Connected
16241-101 Rev. E