Maximum Pressure Value For The Fault Alarm - Michell Instruments Promet I.S. User Manual

Process moisture analyzer

Table of Contents

Promet I.S. User's Manual

3.6.4

Maximum Pressure Value for the Fault Alarm

This is the maximum pressure above which the fault alarm will be activated.

Increase or decrease the value by pressing the  and  keys.

When the desired set-point is on the display press the

conﬁ rm. The display will then change to the next sub-menu

output settings.

NOTE: The unit could be either barg (B) or psig (P), depending on the choice

of pressure unit in

The value will be automatically converted if a new unit is selected.

Michell Instruments

6 8. 9 8

M A X _ B

– display settings sub-menu (refer to Section 3.5.1).

DISP

OPERATION

key to

Select

–

OUTPUT

Table of Contents

Do you have a question about the Promet I.S. and is the answer not in the manual?