Main Reading Page; Display Set-Up; Pressure Unit Selection - Michell Instruments Promet I.S. User Manual

Promet I.S. User's Manual
3.4

Main Reading Page

The Main Reading Page is the default screen shown after turning the instrument on. It
will display the units of measurement selected by the user (see Section 3.2.2.1).
3.5

Display Set-Up

The display preference of the Main Reading Page can be confi gured under
display settings sub-menu.
From the Main Reading Page, press the
setting option is:
The top line shows the navigation command. Press the  key to change the navigation
command from
Press the
Select
sub-menu or enter this display setting sub-menu. The fi rst setting parameter under the
display settings sub-menu is the unit for pressure reading / set value.
3.5.1

Pressure Unit Selection

Either
BARG
a. Change the selection by scrolling through these two options using the 
and  keys.
b. When the desired unit is shown on the display, press the
confi rm. The display will then change to the next setting parameter which
is for
PPMV I
NOTE: The pressure reading / set value at the Main Reading Page will then
change to the selected unit.
Michell Instruments
to .
SKIP ENTER
key to confi rm the navigation command and either skip to the next
or can be selected as the unit for the pressure reading / set value.
psiG
readings.
key to enter the main menu. The fi rst
Menu
S K I P
D I S P
E N T E R
D I S P
B A R G
P R E S S
OPERATION
–
DISP
key to
Select
35