Table of Contents
Advertisement
INSTALLATION
2.4.2
Control Unit Wiring
The electrical connections are located at the rear panel of the control unit. There are
spaces for four individual channels.
16
HAZARDOUS AREA INFORMATION:
The only connections on the control unit which can take cables
from hazardous area are the connectors labelled
ALL OTHER CONNECTORS MUST NOT BE CONNECTED TO CABLES
NOTE: Make sure channels are connected correctly.
Connections for each channel are identical.
The following text will only refer to one channel.
Promet I.S. User's Manual
SENSOR INPUTS
FROM HAZARDOUS AREA
.
97221 Issue 5, March 2017
Advertisement
Table of Contents
Need help?
Do you have a question about the Promet I.S. and is the answer not in the manual?