3.2.2.2 Manual Set Pressure Value; 3.2.2.3 Display Brightness Adjustment; Sample Flow Start-Up - Michell Instruments Promet I.S. User Manual

OPERATION
At the Main Reading Page, the full description of the currently selected unit for the
moisture measurement will scroll across the display on the bottom line at set intervals
(set in the
DISP
NOTE: Unit for the sample pressure reading / set value can be set in the
– display settings sub-menu.
NOTE: After the display units are set, they will remain the same even after
the analyzer power is turned off and on again.

3.2.2.2 Manual Set Pressure Value

If the model without active pressure compensation (order code: G) is ordered, press
the  and  keys from the Main Reading Page to manually set the required pressure.

3.2.2.3 Display Brightness Adjustment

The brightness of the display can be adjusted. From the Main Reading Page, press and
hold the
Select
a. Use the  and  keys to adjust the display brightness.
b. Press the
return to the Main Reading Page.
3.2.3

Sample Flow Start-Up

Follow the Promet I.S. Premium Sampling System Instructions to establish the sample
fl ow of:
1 to 5 Nl/min (2.1 to 10.6 scfh).
32
– display settings sub-menu).
key then press the  key to enter the brightness adjustment page.
key to confi rm the adjustment. The display will then
Select
Promet I.S. User's Manual
2
B R I
97221 Issue 5, March 2017
DISP