Saddle Adjustment - Maxxus 6.2 Installation & Operating Manual

Saddle Adjustment

Vertical Saddle Adjustment
The saddle position can be adjusted vertically to set the optimal distance for you to operate the pedals. To do
this, release the locking knob (32).
ATTENTION:
Please note that the locking knob (32) is a quick-release system. You only have to turn the knob anti-clockwise
2-3 times and then pull to release it. Hold the knob in this position to set the desired saddle height.
Release the knob to engage the locking mechanism again. It may be necessary to move the seat post slightly
up or down to allow the mechanism to engage properly. Tighten the locking
knob (32) clockwise.
How to find the Optimal Saddle Height:
Make sure you wear the shoes you want to wear during your workout. Com-
fortable running or sports shoes are ideal.
Adjust the pedal position so that the right pedal arm is pointing vertically
down at the lowest point of its radius of motion.
Sit on the saddle and place the heel of your right foot on the right pedal. Your
leg should be almost fully extended. If this is not the case, adjust the saddle
height accordingly.
Now put the ball of the foot on the pedal. Your leg should be slightly angled. This is the ideal height adjustment
for your saddle.
ATTENTION:
Never exercise with a seat height adjustment which extends your legs completely when the pedals are at their
lowest point.
Horizontal Saddle Adjustment
The saddle position can be adjusted horizontally to set the optimal distance for you to reach the handlebars. To
do this, loosen the locking knob (19) underneath the saddle, slide the saddle to the desired horizontal position
and tighten the locking knob (19) again.
ATTENTION:
Before each workout, make sure that the correct vertical and horizontal saddle adjustment has been selected
and Check that both saddle and seat post are firmly fixed.
19
12
32