Seat Adjustment - Maxxus 4.2 Installation & Operating Manual

B37
Make sure that your exercise equipment is always level. In order to compensate for minor bumps or slopes,
adjustable feet are fitted right and left on the front and rear stands and on the slide frame stand. To ensure that
the device stands level, first turn all feet to the lowest position (position A). If necessary, adjust the feet so that
the training device is level and stable.
If the adjustment range of the adjustable feet is not sufficient to allow level standing of the training device,
please check the surface of the location. If necessary choose a different location where a safe and level position
of the training device is ensured.
Horizontal Adjustment
You can adjust your seat horizontally to set your optimum distance to the
handlebars. Loosen the hand lever (B37) below the seat by turning it an-
ti-clockwise. Move the seat to the desired horizontal position and retighten
the hand lever (B37) clockwise.
Vertical Adjustment
You can adjust the seat position vertically to set your optimum distance to the
pedals. Loosen the knob located on the seat support of the main frame by
turning it anti-clockwise.
WARNING:
Please note that the knob operates a quick-release syshaft. You only have
to turn it anti-clockwise 2-3 times to unlock it, then pull on the knob to quick
release the seat support. Hold the knob in this pulled position and then set
the desired seat height. Let go of the knob to engage the locking mechanism
again. To do this, you may need to move the seat tube slightly up or down to
engage the mechanism in the corresponding seat support hole. Tighten the
knob clockwise again.
Setting the optimum seat height:
Make sure you are wearing the shoes you want to wear during your workout.
Comfortable running shoes or sports shoes are ideal. Adjust the pedal posi-
tion so that the right pedal arm is pointing vertically down and the right pedal
is at the lowest point of its radius of motion. Now sit on the seat and place the
heel of your right foot on the right pedal. Your leg should be almost complete-
ly straight. Adjust the seat height until your right leg is almost fully extended
and then put the ball of the foot on the pedal. Now your leg should be slightly
bent. This is the ideal height adjustment for your seat.
WARNING:
Never train with a seat height adjustment that fully extends your legs at the
lowest position of the pedals.
Position A
Adjustable foot
Position B
Adjustable foot
11

Seat Adjustment

ENG
Levelling