Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Maxxus PRO SPK-23
Summary of Contents for Maxxus PRO SPK-23
- Page 1 ® MAXXUS PRO SPK-23 FITNESS CYCLE OWNER’S MANUAL...
-
Page 2: Table Of Contents
Dear customer, ® Thank you for purchasing MAXXUS Pro SPK-23 Fitness Cycle. This product was designed to meet your workout needs and provide you with a healthier life. Before you begin using this product, please read the Owner’s Manual completely and thoroughly and follow the instructions of all WARNING and CAUTION labels. -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS Before you start to assemble and operate this product, please carefully read the Owner’s Manual in its entirety. Please follow all instructions in this Owner’s Manual as described. Be sure to read through the Safety Instructions below and keep this Owner’s Manual for future reference. -
Page 4: Parts List
PARTS LIST Item Description Quantity Item Description Quantity Main Frame Fly Wheel Rod Rear Foot Bar Spring Washer Front Foot Bar U-Zone Bar Adjustable Bolt Seat Post Lock Nut Handle Post Brake Pad Seat Slider Stopper Set Handle Bar Tension Lever End Cap Screw Adjustable Pad... -
Page 5: Exploded Drawing
EXPLODED DRAWING ____________________________________________________________... -
Page 6: Packing Parts List
PACKING PARTS LIST ____________________________________________________________... -
Page 7: Assembly
ASSEMBLY Read the Owner’s Manual in its entirety before assembly. ● Remove all parts from the box. ● Check to confirm receipt of all parts and quantities shown in the Packing Parts List on ● page 5. (Note: Some parts may be pre-assembled.) STEP 2 Slide the Front Foot Bar (3) to the front of the Main Frame (1) adding two Washers (14), two... - Page 8 ASSEMBLY STEP 4 Attach the Left Pedal (55) and Right Pedal (56) to the Left Crank (53) and Right Crank (54) as shown in Figure 2. ** Tighten the Left & Right Pedals used in STEP 4 with the Spanner Tool (67). STEP 5 Insert the Seat Post (5) into the tube of the Main Frame (1) with Knob (60) as shown in Figure 3.
-
Page 9: How To Use The Bike
ASSEMBLY STEP 7 Insert the Handle Post (6) into the tube of the Main Frame (1) with Knob (60) as shown in Figure 4. ** Hand tighten ONLY. STEP 8 There are two holes on either side of the Handle Bar (8) for Elbow Pad (70) adjustments. -
Page 10: How To Make Resistance Adjustments
After assembling the bike and tightening all appropriate components as instructed, you can now begin using bike. Handle bar, seat, and elbow pad adjustments allow you to adjust the bike to fit your size and body frame. Seat with spring on the underside brings you comfort while riding. Streamline surface design of this bike fits in with ergonomics and increases comfort. -
Page 11: Screw
STEP 1 Slide the Tension Lever (#44) for resistance setting. There are 8 gears (1 through 8) of resistance. Gear 1 has the lowest level of resistance and gear 8 has the highest level of resistance. STEP 2 If you want the resistance to be less, then move the gear to the lowest level of resistance (gear 8), and slightly adjust the Shift Lever Wire (Pillar and Hexagon Screw) as seen below. - Page 12 STEP 3 After Steps 1 and 2 and if the resistance is still needed to be decreased or increased, please follow the instruction below. Press Spring (C), then U-shaped Plate (D) will become loose. Take off the U-shaped Plate (D). Loosen the Hexagon Screw (E) slightly to decrease the resistance.
-
Page 13: Serial Number Label
Before you proceed further with this step, please make sure you have completed the above Steps 1, 2, and 3. If bike still needs more resistance adjustment, then complete Step 4. Picture (F) Picture (G) Loosen the screw which is tightened on the black cap (as seen circled in blue in Picture (F)). -
Page 14: Warranty
(1) year from the date of purchase. This warranty is not transferable to anyone who subsequently purchases the product from the original purchaser. During the warranty period, MAXXUS has the option to replace or repair a part(s) that was discovered damaged or has become damaged due to a manufacturer defect only, and may be done so with serviceable used parts that are equivalent to the new parts in performance.