Seat Adjustment - Maxxus 4.2 R Installation & Operating Manual

Hide thumbs Also See for 4.2 R:

Table of Contents

Seat Adjustment

Horizontal Adjustment

You can adjust your training device horizontally to your individual requirements. Loosen the seat lock by pulling

upwards on the hand lever located to the right under your seat. Press with your feet against the pedals to push

the seat backwards or pull it forwards. When you have found the ideal seated position, press the handle back

down to lock the seat securely. As a general guideline the optimum seat position is:

During training knees should be slightly bent when the pedals are at the furthest point away from you. Make

sure that your knees are never fully extended at this point.

Handle

ENG

Levelling

Make sure that your exercise equipment is always level. In order to compensate for minor bumps or slopes,

adjustable feet are fitted right and left on the front and rear stands and on the slide frame stand. To ensure that

the device stands level, first turn all feet to the lowest position (position A). If necessary, adjust the feet so that

the training device is level and stable.

If the adjustment range of the adjustable feet is not sufficient to allow level standing of the training device,

please check the surface of the location. If necessary choose a different location where a safe and level position

of the training device is ensured.

Position B

Position A

Adjustable foot

Table of Contents