Seat Adjustment - Maxxus 4.2R Installation And Operating Manual

Hide thumbs Also See for 4.2R:

Table of Contents

Seat Adjustment

You can adjust the length of your training device. To do this, release the seat lock by pulling up on the hand

lever which is located under the seat on the right. Push your feet against the pedals to push the seat backwards

or pull it forward. When you have set the optimum seating position, push the hand lever down again to lock the

seat.

As a rule of thumb for optimum seat adjustment, while exercising the knees should be slightly bent when the

pedals have reached the furthest point away from you. Make sure that your knees are never stretched at this

point.

Hand Lever

Levelling

Make sure that your exercise equipment is always level. In order to compensate for minor bumps or slopes,

adjustable feet are fitted right and left on the front and rear stands and on the sliding. To ensure that the device

stands level, first turn all feet to the lowest position (position A). If necessary, adjust the feet so that the training

ENG

device is level and stable.

If the adjustment range of the adjustable feet is not sufficient to allow level standing of the training device,

please check the surface of the location. If necessary choose a different location where a safe and level position

of the training device is ensured.

Position B

Position A

Adjustable foot

Table of Contents

4.2