Assembly - Maxxus 6.2 Installation & Operating Manual

Assembly

Carefully unpack all of the delivered items. Two people are required because some parts of your exercise ma-
chine are bulky and heavy.
Check that all of the fastening materials (Screws, nuts, etc.) and components have been received complete
before starting assembly.
Carefully perform the assembly carefully as damage or defects due to errors are not covered by the warranty
or guarantee. Read the instructions carefully before starting, keep to the sequence of Installation steps exactly
and follow the instructions of each installation step. Always work safely, wear suitable working gloves and make
sure you have a second person to help with heavy and bulky components. Secure moving parts so that no body
parts can be pinched during assembly.
The installation of the training device must be carried out by competent adults.
Assemble your exercise equipment in a location that is level, clean and free from obstructions. Carry out the
assembly with 2 people. Only start using your training device after you have fully completed all assembly steps.
Step 1.1: Mounting the Front Stand
Attach the front stand with transport rollers (2) to the front of the base frame (1) with two M10x25 hexagon sock-
et bolts (8), two spring washers Ø10 (11) and two washers Ø10 (13).
Step 1.2: Mounting the Rear Stand
Attach the rear stand with handle (3) to the rear of the base frame (1) with two Allen bolts M10x25 (8), two
spring washers Ø10 (11) and two washers Ø10 (13).
Adjust the feet (34) so that the exerciser is level and secure. Turn the feet up as far as they can go and then
adjust them downwards as required until both stands have solid ground contact. Check that the device is level
with spirit level.
13
1
8
11
1
3
34
6
8
11
13
34