PACE Series SCPI Manual
The SOURce subsystem controls the pressure output of the instrument.
Applicability:
Command Syntax
SOURce:ALTitude:LEVel:IMMediate:AMPLtude
Parameter:
Short form:
Function:
Default:
Query Syntax
SOURce:ALTitude:LEVel:IMMediate:AMPLtude?
Short form:
Function:
Response:
Description
This command sets the altitude set-point. This query gets the decimal number representing
altitude in current units.
Note: If the instrument is not in aero mode it returns an error: -221. Settings conflict.
K0472 Revision A
SOURce
SOUR:ALT
PACE6000
<string>
SOUR:ALT
Sets the altitude set-point.
-
SOUR:ALT?
Queries altitude set-point.
Decimal number representing altitude in current units.
4-79