Syst:comm:ser:type:par - GE PACE Series Technical Manual

4 Command and Query Summary

:SYST:COMM:SER:TYPE:PAR

Applicability:
Command Syntax
:SYSTem:COMMunicate:SERial[:TYPE]:PARity
Parameter:
Short form:
Function:
Note:
This command breaks the communication between the PC and the PACE instrument. No
further query can be made until after resetting the pc to the same setting. The instrument
cannot be brought back to local mode.
Query Syntax
:SYSTem:COMMunicate:SERial:TYPE:PARity?
Short form:
Function:
Response:
Description
This command instructs the instrument to set serial communication parity. The command
query gets the current parity setting.
Example
TX> :SYST:COMM:SER:TYPE:PAR?
RX> :SYST:COMM:SER:TYPE:PAR NONE
The current setting ignores the parity check.
It can be set to ODD and EVEN by sending:
TX> :SYST:COMM:SER:TYPE:PAR ODD
or
TX> :SYST:COMM:SER:TYPE:PAR EVEN
K0472 Revision A
PACE1000, PACE5000, PACE6000
Enumerate
SYST:COMM:SER:TYPE:PAR
Sets parity, odd, even or none.
:SYST:COMM:SER:TYPE:PAR?
Queries current parity setting.
Returns odd, even or none.
4-118