V / Ma (Source Mode) - GE Druck PC6-IDOS User Manual

2.2 V/mA (Source mode)
The second option for V and mA is 'Source' (output) mode.
• Select 'Source' using the
The following options are available:-
2.2.1 Range:
(sets the upper and lower limits in Source
mode)
• Select 'Range' using the
The following options are available:- 'Zero' or 'FS'.
• 'Zero' is the first option, press the
• Change the value as required using the
ENTER
press the key to enter.
ZERO
• To alter the FS value, select 'FS' using the
ENTER
press the key.
ZERO
• Change the value as required using the
press the to enter.
ENTER
ZERO
Note: The 'Zero' and 'FS' values have been limited with respect
to each other as follows:
• The lower range is limited to between 0 and the user's upper
range minus 1% of the maximum source range available
(e.g. 10 V or 50mA).
• The upper range is limited to between the lower range plus
1% of the maximum source range and the maximum source
range available.
K0354, Iss. 1
ENTER
key and press the key.
ZERO
ENTER
key and press the key.
ZERO
key to select it.
ENTER
ZERO
keys and
key and
keys and
2.2.2 Convert:
To set up conversion factors for Zero, Full Scale or a user
defined (Text) value.
• Select 'Zero' by pressing the
• Change the zero conversion values as required using the
keys and the
• Select 'FS' (full scale) using the
key.
• Change the 'FS' conversion values as required using the
keys and the
• Select 'Text' using the
• Select a three letter or number text value using the
keys and the key.
ENTER
ZERO
• Once you have completed altering any or all of the convert
functions select 'Exit' or press the
'Source' menu.
2.2.3 P->V / mA:
To setup a pressure to voltage / current
conversion
• Select 'P->V/mA' using the
• For 'Zero', press the
ENTER
ZERO
• Change the V / mA value as required using the
keys and the key.
ENTER
ZERO
• Change the pressure value as required using the
keys and the key.
ENTER
ZERO
• Select 'FS' using the
• Change the V / mA value using the
key.
ENTER
ZERO
• As with the 'Zero', change the pressure value as required
using the keys and the
key.
ENTER
ZERO
key.
ENTER
ZERO
key and press the
ENTER key.
ZERO
key and press the
ENTER
ZERO
key to return to the
MENU
key and press the
key to enter.
key and press the key.
ENTER
ZERO
keys and the
key.
ENTER
ZERO
ENTER
ZERO
key.
key.
ENTER
ZERO
Page 23