Sens:pres:slew - GE PACE Series Technical Manual

PACE Series SCPI Manual
Applicability:
Command Syntax
n/a
Parameter:
Short form:
Function:
Query Syntax
:SENSe[x][:PRESsure]:SLEW?
where x = 1 or 2 is the module number (default - 1)
Short form:
Function:
Response:
Description
This query gets the slew rate of the input pressure always in current pressure units per
second. A constant input pressure gives a slew rate of: 0.0.
Example 1
TX> :SENS:PRES:SLEW?
RX> :SENS:PRES:SLEW -20.1089802
Example 2
TX> :SENS2:PRES:SLEW?
RX> :SENS2:PRES:SLEW -20.0536633
K0472 Revision A

:SENS:PRES:SLEW

PACE1000, PACE5000, PACE6000
:SENS:SLEW?
Asks for current slew rate.
Decimal number representing slew rate always in current pressure units
per second.
4-55