Sour:pres:slew:mode - GE PACE Series Technical Manual

4 Command and Query Summary
Applicability:
Command Syntax
:SOURCE[x][:PRESsure]:SLEW:MODE <enumerated>
where x = 1 or 2 is the module number (default - 1)
Parameter:
Short form:
Function:
Default:
Query Syntax
:SOURCE[x][:PRESsure]:SLEW:MODE?
where x = 1 or 2 is the module number (default - 1)
Short form:
Function:
Response:
Description
The controller can operate in two rate modes - maximum and value. In maximum rate the
controller tries to achieve set-point as quickly as possible. In value mode the controller
achieves the set-point at a user selected rate.
TX> :SOUR:PRES:SLEW:MODE?
Example 1
RX> :SOUR:PRES:SLEW:MODE MAX
Can be set to user defined rate:
TX> :SOUR:PRES:SLEW:MODE linear
Example 2
TX> :SOUR:PRES:SLEW:MODE?
RX> :SOUR:PRES:SLEW:MODE LIN
K0472 Revision A

:SOUR:PRES:SLEW:MODE

PACE5000, PACE6000
<enumerated>
SOUR:SLEW:MODE <enumerated>
Select the rate the controller should use to achieve set-point.
MAXimum
:SOUR:SLEW:MODE?
Query rate mode.
MAX for maximum rate
LIN for user defined rate
MAXimum - maximum rate
LINear - user selected linear rate
4-94