Inst:sens:neg - GE PACE Series Technical Manual

PACE Series SCPI Manual
Applicability:
Command Syntax
n/a
Parameter:
Short form:
Function:
Query Syntax
:INSTrument:SENSor[x]:NEGCal?
where: x = 1, 2...8 is the sensor number. It defaults to 1.
Short form:
Function:
Response:
x SensorPACE5000, PACE6000
1 Module 1: control sensor
2 Module 1: source pressure +ve
3 Module 1: source pressure -ve
Module 1: barometric range
4
(optional)
Description
This command query returns sensor negative calibration supported or not supported. Used
in DPI515 emulation; for PACE5000/6000 this query always returns '1'.
:INST:SENS:NEGC?
:INST:SENS:NEGC 1
Default - module 1 control sensor NEGcal.
:INST:SENS1:NEGC?
:INST:SENS:NEGC 1
Returns module 1 control sensor NEGcal.
:INST:SENS2:NEGC?
:INST:SENS2:NEGC 1
Returns module 1 +ve source sensor NEGcal.
:INST:SENS3:NEGC?
:INST:SENS3:NEGC 1
Returns module 1 -ve source sensor NEGcal.
:INST:SENS4:NEGC?
:INST:SENS4:NEGC 1
Returns module 1 barometric sensor NEGcal.
K0472 Revision A

INST:SENS:NEG

PACE1000, PACE5000, PACE6000
:INST:SENS:NEG?
Queries sensor negative calibration.
<boolean>: 0 -
1 -
PACE1000
Internal
sensor1
Internal
sensor 2
Internal
sensor 3
External
IDOS-1
negative calibration not supported
negative calibration supported.
x SensorPACE5000, PACE6000
5 Module 2: control sensor
6 Module 2: source pressure +ve
7 Module 2: source pressure -ve
Module 2: barometric range
8
(optional)
:INST:SENS5:NEGC?
:INST:SENS5:NEGC 1
Returns module 2 control sensor NEGcal.
:INST:SENS6:NEGC?
:INST:SENS2:NEGC 1
Returns module 2 +ve source sensor NEGcal.
:INST:SENS7:NEGC?
:INST:SENS7:NEGC 1
Returns module 2 -ve source sensor NEGcal.
:INST:SENS8:NEGC?
:INST:SENS8:NEGC 1
Returns module 2 barometric sensor NEGcal.
4-23
PACE1000
External
IDOS-2
External
IDOS-3
-
-