Lcd Block - Emerson Rosemount 3051 Manual
Transmitter with foundation fieldbus protocol
Hide thumbs
Also See for Rosemount 3051:
- Quick start manual ,
- Reference manual (222 pages) ,
- Manual (122 pages)
Table of Contents
Advertisement
Rosemount Model 3051 Transmitter with F
LCD BLOCK
Figure C-8. Transducer500 Properties:
Process Screen
C-26
TM
fieldbus Protocol
OUNDATION
The LCD can display up to four different parameters. If a parameter
from a function block is displayed, then the function block must be
scheduled (downloaded) in order for it to be displayed on the LCD. If a
parameter from a different device is displayed, it must be linked to a
block in the Model 3051 transmitter with the LCD display and it must
be downloaded. It can display any input or output parameter of any
block in the Model 3051. The first display is pre-configured to show the
value of the transducer block of the Model 3051. This value can be left
or changed.
1) Open the LCD block by double clicking on the LCD transducer block
in Deltav Explorer.
Figure C-8 will appear. Make sure the block is in "Automatic" mode.
Then select the "Local Display" tab.
Advertisement
Table of Contents
