Emerson Rosemount 3051 Manual page 102

Rosemount Model 3051 Transmitter with F
Table C-5. Resource Block Parameters (continued)
Parameter
DD_RESOURCE
DD_REV
define_write_lock
detailed_status
DEV_REV
DEV_TYPE
download_mode
DRAIN_VENT_MAT
FEATURES
FEATURES_SEL
final_assembly_number
FLANGE_MTL
C-8
OUNDATION
Index
Number Description
09 String identifying the tag of the resource which contains the Device Description for
this resource.
13 Revision of the DD associated with the resource - used by an interface device to locate
the DD file for the resource.
60 Enumerated value describing the implementation of the WRITE_LOCK.
55 Indicateds the state of the transmitter. See Resource Block detailed status codes.
12 Manufacturer revision number associated with the resource - used by an interface
device to locate the DD file for the resource.
11 Manufacturer's model number associated with the resource - used by interface devices
to locate the DD file for the resource.
67 Gives access to the boot block code for over-the-wire downloads.
0 = Uninitialized
1 = Run mode
2 = Download mode
75 Type of material of the drain vents on the flange. See drain vent material codes.
2 = 316 Stainless Steel
3 = Hastelloy C
4 = Monel
251 = None
252 = "Unknown"
253 = "Special"
17 Used to shows supported resource block options.
18 Used to show selected resource block options. The 3051 supports the following:
Unicode: Tells host to use unicode for string values
Reports: Enables alarms. Must be set for alarming to work
Software Lock: Software write locking enabled but not active. WRITE_LOCK must be
set to activate.
Hardware Lock: Hardware write locking enabled but not active. WRITE_LOCK follows
the status of the security switch.
49 Final Assembly Number is placed on the neck label.
69 Type of material of the flange. See flange material codes.
0 = Carbon Steel
2 = 316 Stainless Steel
3 = Hastelloy C
4 = Monel
™
24 = Kynar
252 = "Unknown"
253 = "Special"
TM
fieldbus Protocol
™
™