Emerson Rosemount 3051 Manual page 41

Figure 3-2. Fieldbus Device
Properties Window
Figure 3-3. Basic Control Strategy
Set Transmitter
Configuration Parameters
1. Enter a description of the device properties information in the
window.
2. Select "OK" to add the device to the segment.
The device appears on the segment as a non-commissioned Fieldbus
device ( ).
3. Save the control strategy.
4. Select the "Assign to Node" button (
the correct node in the controller.
1. Select DeltaV > Engineering > DeltaV Explorer from the Start
menu.
2. Navigate through the file structure to find the transmitter you
wish to configure (see Figure 3-4).
Configuration
) to assign the strategy to
3-5