Restore Factory Default Settings - Promise Technology VTrak D5000 Series Product Manual

Promise Technology

Restore Factory Default Settings

This feature restores settings to their default values.
To restore all settings to their default values:
1. Click the Administration tab.
2. Click Restore Factory Default.
3. In the Restore factory default settings screen, check the boxes beside the settings you want to reset to
default value (see Factory Default Settings (by type) table below). Note that you have the option to
select all firmware or all software settings to factory default, or choose each setting to reset individually for
both categories.
4. Click the Submit button.
5. In the Confirmation box, type the word "confirm" in the field provided and click the Confirm button.
Caution
If you apply Restore Factory Default settings to the Management
Network Settings, you might lose your WebPam Pro connection.
Caution
Use this feature only when required and only on the settings
that you must reset to default in order to set them correctly.
128
VTrak D5000 Series