Promise Technology VTrak D5000 Series Product Manual page 190

Promise Technology
-c <ctrl ID>
-p <port ID>
-f <protocol family>
ipv4
ipv6
-y
-s "<option>=<value>"
The following settings apply to portal. Requires -t portal or -t portal -m and -c <controllerr id> options.
ip=
ipmask=
gateway=
dhcp=
enable
disable
Specifies the controller ID. When the action is to modify setting and -c is
not specified, the value is default to be the current controller id.
Specifies the port ID.
To specify which protocol family will be modified, enabled or disabled.
(Default)IPv4.
IPv6.
Execute command in non-interactive mode.
Only valid for disable, mod action.
List the various settings for the MGMT ports and portals.
These options are comma separated.
Works only with modify command.
Specify the primary IP address.
Specify the primary subnet mask.
Specify the gateway.
Enable or disable DHCP support.
Currently only supported for ipv4.
181
Managing with CLI