Promise Technology VTrak D5000 Series Product Manual page 149

Promise Technology
Table of Supported Commands (Continued)
Command Action
net View or edit Ethernet network information and settings.
ntp View or edit NTP status and settings.
password Modify a user's password.
pcie View PCIe slots information in controller.
pdm
perfstats
periodsnap List, add, modify or delete periodic snapshot task.
phydrv View or edit physical drive information and settings. Locate a physical drive via LEDs.
ping Ping another system through management port.
pool View or edit pool information. Create, edit or delete a new or existing pool.
protocol Protocol settings.
ptiflash Update system software and firmware through tftp server.
quota List, set, cancel or refresh the Quota settings on NAS Share.
rb View rebuild status and progress. Start, stop, pause, or resume a rebuild process.
rc
replication View volume replication status. Start or stop replication.
sasdiag
sc View spare check status. Start spare check.
session View the list of active sessions.
shutdown Shutdown or restart system.
smart S.M.A.R.T diagnostic for physical drives.
Note: Commands are NOT case sensitive.
View PDM status and progress.
Start, stop, pause or resume a PDM process.
Start and view performance statistics for controllers, logical drives, physical drives or
ports.
View redundancy check status and progress. Start, stop, pause or resume
redundancy check.
SAS diagnostic command.
VTrak D5000 Series Product Manual
140