Chrysler 300M 2002 Service Manual page 374

LH
ILLUMINATED ENTRY (Continued)
DIAGNOSIS AND TESTING - ILLUMINATED
ENTRY
When testing the system, all doors must be closed
to prevent courtesy lamps from lighting. Verify that
remote keyless entry system is operating properly
before testing illuminated entry circuits. The body
controller uses input from the remote keyless entry
system to switch ON the courtesy lamps.
Refer to Wiring Diagrams, for component location
and circuit information. Refer to the proper Body
Diagnostic Procedures manual for complete diagnos-
tic information.
LAMPS/LIGHTING - INTERIOR 8L - 39
TRANSMISSION RANGE
INDICATOR ILLUMINATION
DESCRIPTION
The floor console mounted Transmission Range
Indicator Lamp display utilizes electroluminescent
technology as the light source. The only diagnostics
that should be performed is to check for the presence
of 12 volts on the mating wire harness connector. The
electroluminescent lamp requires a 120 volt AC sig-
nal that is provided by a power converter included in
the assembly. Because of a potential shock hazard,
diagnostics testing of the electroluminescent lamp
and power converter should be avoided. The module
is not serviceable. Refer to Body, Floor Console Shift
Bezel Removal and Installation.