Chrysler 300M 2002 Service Manual page 119

5 - 20 BRAKES - BASE BRAKE SYSTEM
BRAKE PADS/SHOES - REAR (Continued)
(5) Support caliper assembly firmly from rear strut
to prevent weight of caliper from damaging the flex-
ible brake hose (Fig. 24).
Fig. 24 Storing Caliper
1 - FLEX HOSE
2 - STRUT
3 - WIRE HANGER
4 - CALIPER ASSEMBLY
(6) Remove the rear rotor from the hub by pulling
it straight off the wheel mounting studs (Fig. 25).
(7) Remove outboard brake shoe, by prying brake
shoe retaining clip over raised area on caliper and
sliding the shoe off the caliper (Fig. 26).
(8) Pull inboard brake shoe away from piston,
until the retaining clip is free from the cavity in the
piston (Fig. 27).
Fig. 25 Removing / Installing Rear Rotor
1 - BRAKE ROTOR (DISC)
2 - DISC SHIELD
3 - HUB
4 - DRUM-IN-HAT PARKING BRAKE
Fig. 26 Removing / Installing Outboard Brake Shoe
1 - CALIPER FINGERS
2 - RETAINING CLIP
LH