Danfoss VLT Aqua Drive FC 202 Operating Instructions Manual page 36

5. Electrical installation
5.1.16. Access to Control Terminals
All terminals to the control cables are located
underneath the terminal cover on the front of
the frequency converter. Remove the terminal
cover with a screwdriver.
5
Remove front-cover to access control termi-
nals. When replacing the front-cover, please
ensure proper fastening by applying a torque
of 2 Nm.
5.1.17. Control Terminals
Drawing reference numbers:
1.
2.
3.
4.
36
10 pole plug digital I/O.
3 pole plug RS-485 Bus.
6 pole analog I/O.
USB connection.
MG.20.M2.02 - VLT
Illustration 5.16: A2 and A3 enclosures
Illustration 5.17: A5, B1,B2, C1 and C2 enclosures
Illustration 5.18: Control terminals (all enclosures)
®
is a registered Danfoss trademark
®
VLT AQUA Drive
Operating Instructions