Danfoss VLT Aqua Drive FC 202 Operating Instructions Manual page 82

7. How to programme the frequency converter
After selecting a parameter group, choose a
parameter by means of the navigation keys.
The middle section on the GLCP display shows
the parameter number and name as well as
the selected parameter value.
7.1.6. Changing Data
1.
2.
3.
4.
5.
7
6.
82
Press [Quick Menu] or [Main Menu] key.
Use [ ] and [ ] keys keys to find parameter group to edit.
▲ ▼
Use [ ] and [ ] keys to find parameter to edit.
▲ ▼
Press [OK] key.
Use [ [ ] and [ ] keys to select correct parameter setting. Or, to move to digits within
▲ ▼
a number, use keys. Cursor indicates digit selected to change. [ ] key increases the
value, [ ] key decreases the value.
▼
Press [Cancel] key to disregard change, or press [OK] key to accept change and enter
new setting.
MG.20.M2.02 - VLT
Illustration 7.10: Display example.
®
is a registered Danfoss trademark
®
VLT AQUA Drive
Operating Instructions
▲