6.3.
Password
Mandatory
The access to the controller operating parameters requires the input of a 4-digit code.
Note
The default passwords are 0000 for the basic menu and 1111 for the intermediate and
advanced menu.
Access password
A
Enter the menu.
B
Use
to modify the digit.
C
Press
to pass to the next digit.
D
Press
to validate the password.
Changing the password
A
Enter the menu.
B
Press
and
C
Change the password using
D
Press
to validate the new password.
6.4.
Controller setting
Note
Menus are displayed in a defined and incremental order.
Note
While the parameters are being edited, the regeneration icon is on and flashing.
Mandatory
In order to store the new settings in the programming mode, it is necessary to go through
all the parameters.
Ref. MKT-IM-009 / C - 08.06.2018
Installer Manual Siata V132-SFE-EV-VIRIDION - Programming
for 5 seconds.
to modify the digit and
to pass to the next digit.
49 / 110