Pentair SIATA V132-SFE-EV-VIRIDION Installer Manual page 62

Installer Manual Siata V132-SFE-EV-VIRIDION - Programming
BLFC size
Note
The value can be set to 00 (gpm), 01 (L/min) or 02 (Custom).
Set the BLFC size.
A Use and to set the size.
B Press to validate and switch to the next parameter.
BLFC range in gpm
Note
The value can be set from 0.01 gpm and 9.99 gpm.
Note
The option is displayed only if rF (BLFC size) is set to 02.
Set the BLFC range in gpm.
A Use and to set the BLFC range.
B Press to validate and switch to the next parameter.
Remote regeneration start mode
Note
This mode is used in case a remote regeneration is initiated.
Note
If this mode is deactivated (0), the regeneration will be immediate.
If this mode is activated (1), the regeneration will be delayed to the programmed start
regeneration time.
Set the remote regeneration start mode.
A Use and to set the start mode.
B Press to validate and switch to the next parameter.
62 / 110 Ref. MKT-IM-009 / C - 08.06.2018