Table of Contents
Advertisement
Installer Manual Siata V132-SFE-EV-VIRIDION - Maintenance
9.2.6. Brine valve replacement
No.
A
Using a screwdriver, unscrew (1).
B
Remove the back panel (2).
C
Using a screwdriver, unscrew (3).
D
Remove the cover (4) by pushing its sides as shown.
E
Using a wrench, disconnect the brine lines
F
Disconnect the conductivity probe (14).
G
Pull the electronic board (11).
H
Disconnect the flat cable (10) and guard the electronic board (11).
I
Disconnect the micro-switches (7).
Note
Pay attention to the connector order.
J
Using a screwdriver, unscrew (9) and remove the brine cam (8).
K
Remove the pusher (12).
L
Using pliers, remove the circlip (13) and the brine valve (15).
M
Replace the brine valve (15).
N
Reverse above procedure steps to rebuild.
80 / 110
Operation
(5
and 6).
Ref. MKT-IM-009 / C - 08.06.2018
Advertisement
Table of Contents
