Table of Contents
Advertisement
Opening time of brine valve
Note
The display shows the time (in hour) of the brine valve opening to prepare the total volume
of brine.
Note
The opening time can be set from 0h to 24h.
Note
This option is displayed only if vB (variable brining) is set to ON and Pr (refill first) is set to 1.
Set the opening time of brine valve:
A
Use
and
to set the opening time.
B
Press
to validate and switch to the next parameter.
First regeneration cycle duration
Note
The duration of the regeneration cycle can be set from 0 (OFF) to 99 minutes.
Set the first regeneration cycle duration.
A
Use
and
to set the duration.
B
Press
to validate and switch to the next parameter.
Second regeneration cycle duration
Note
The duration of the regeneration cycle can be set from 0 (OFF) to 99 minutes.
Set the second regeneration cycle duration.
A
Use
and
to set the duration.
B
Press
to validate and switch to the next parameter.
Ref. MKT-IM-009 / C - 08.06.2018
Installer Manual Siata V132-SFE-EV-VIRIDION - Programming
55 / 110
Advertisement
Table of Contents
