Table of Contents
Advertisement
Remote regeneration start delay
Note
Duration in minute of the external signal on port 15/16 of terminal strip to start a
regeneration.
Set the remote regeneration start delay time.
A
Use
and
to set the delay time in minute.
B
Press
to validate and switch to the next parameter.
Interval between maintenance
Note
The interval between maintenance can be set from 0 (OFF) to 52 weeks.
Set the interval between maintenance.
A
Use
and
to set the interval.
B
Press
to validate and switch to the next parameter.
Technical service phone number
Note
The phone number may be set to a maximum of 7 fields, each consisting of 4 digits.
Note
The number lit on the upper part of the display identifies the current field.
Set the technical service phone number.
A
Use
to modify the digit.
B
Press
to pass to the next digit.
C
Press
for 3 seconds to pass to the next field of 4 digits.
D
Press
to validate the phone number and switch to the next
parameter.
Ref. MKT-IM-009 / C - 08.06.2018
Installer Manual Siata V132-SFE-EV-VIRIDION - Programming
63 / 110
Advertisement
Table of Contents
