Table of Contents
Advertisement
Installer Manual Siata V132-SFE-EV-VIRIDION - Maintenance
9.2.7. Injector and injector screen cleaning
No.
A
Using a screwdriver, unscrew (1).
Caution
Unscrew the screws slowly to prevent gripping between the material and the screws.
B
Remove the collector (2).
C
Remove and clean the injector (4) and the flow breaker (5).
D
Using pliers, remove and clean the injector screen (3).
Note
Use water or compressed air to clean the injector, flow breaker and injector screen.
E
Replace and grease all the o-rings with silicone grease (cod. 8500).
F
Reverse above procedure steps to rebuild.
Caution
When reassembling the collector:
- try to match the self tapping screws with the original thread;
- slowly screw by hand without forcing then tighten using a screwdriver;
- always carry out these operations using normal screwdrivers; do not use automatic
screwdrivers.
82 / 110
Operation
Ref. MKT-IM-009 / C - 08.06.2018
Advertisement
Table of Contents
