Table of Contents
Advertisement
Chlorine cell control duration
Note
The duration of the chlorine cell control duration can be set from 1 minute to 2C (second
regeneration cycle duration).
Note
This option is displayed only if Cl (chlorine cell control) is set to ON.
Set the chlorine cell control duration.
A
Use
and
to set the control cell duration.
B
Press
to validate and switch to the next parameter.
Holiday function
Note
The holiday function permit to put the system in a hibernation state after a predetermined
number of days without any water consumption.
Note
The interval, before the holiday mode is activated, can be set from 0 (OFF) to 99 days.
Note
This option is displayed only if SH (regeneration mode) is set to 1 or to 2.
Set the interval before the holiday.
A
Use
and
to set the interval.
B
Press
to validate and switch to the next parameter.
Prescaler flag
Note
Set the prescaler to 1 (pre-set) to use it with programmed values. To let it free, set it to 0.
Note
This option is displayed only if SH (regeneration mode) is set to 1 or to 2.
Set the prescaler flag.
A
Use
and
to set the prescaler flag.
B
Press
to validate and switch to the next parameter.
Ref. MKT-IM-009 / C - 08.06.2018
Installer Manual Siata V132-SFE-EV-VIRIDION - Programming
57 / 110
Advertisement
Table of Contents
