Parking Light Bulb Removal/Installation - Mazda MX-5 Miata Sport 2007 Manual

headlight control module terminal F and
ground for following:
Short to power supply

Open circuit

Is the wiring harness normal?

VERIFY WHETHER MALFUNCTION IS IN
DISCHARGE HEADLIGHT BULB OR
DISCHARGE HEADLIGHT CONTROL
MODULE
Install the discharge headlight low bulb

(previously verified as illuminating
normally).
7
(See HEADLIGHT BULB
REMOVAL/INSTALLATION .)
Connect the discharge headlight control

module connector.
Turn the headlight switch to the

HEADLIGHT (LO) position.
Does the headlight (low-beam) illuminate?


PARKING LIGHT BULB REMOVAL/INSTALLATION

1. Remove the battery cover.
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
3. Disconnect the connector.
4. Remove the socket, then remove the parking light bulb.
5. Install in the reverse order of removal.
2007 Mazda MX-5 Miata Sport
2007 ACCESSORIES & BODY, CAB Lighting Systems - MX-5 Miata
No Replace the related wiring harness.
Yes System inspection completed.
Replace the front combination light. (See
No FRONT COMBINATION LIGHT
REMOVAL/INSTALLATION .)