Table of Contents
Advertisement
2007 ACCESSORIES & BODY, CAB Glass/Windows/Mirrors - MX-5 Miata
CAUTION:
Fig. 35: Identifying Sections For Applying Primer
Courtesy of MAZDA MOTORS CORP.
11. Apply sealant to the area of the glass surface as shown in the figure.
12. Insert the windshield locator pins to the body and install the windshield.
Fig. 36: Applying Sealant To Glass Surface
Courtesy of MAZDA MOTORS CORP.
13. Verify that the clearance of the A-pillar is within the range shown in the figure, and press along the
perimeter of the glass.
14. Install the following parts:
1. A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION .)
2. Map light (See MAP LIGHT REMOVAL/INSTALLATION .)
3. Front header trim (See FRONT HEADER TRIM REMOVAL/INSTALLATION .)
4. Rearview mirror (See REARVIEW MIRROR REMOVAL/INSTALLATION..)
2007 Mazda MX-5 Miata Sport
To prevent weakening of the primer adhesion, keep the bonding
surface free of dirt, moisture, and grease. Do not touch the
surface with your hand.
Advertisement
Table of Contents
Troubleshooting
