Mazda MX-5 Miata Sport 2007 Manual page 1710

Fig. 3: Identifying Parking Brake Lever Adjusting Nut
Courtesy of MAZDA MOTORS CORP.
PARKING BRAKE LEVER REMOVAL/INSTALLATION
1. Remove the middle pipe. (See EXHAUST SYSTEM REMOVAL/INSTALLATION [LF] .)
2. Remove the propeller shaft. (See PROPELLER SHAFT REMOVAL/INSTALLATION .)
3. Remove the console. (See CONSOLE REMOVAL/INSTALLATION .)
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
6. After installation, inspect the parking brake stroke and adjust if necessary.
2007 Mazda MX-5 Miata Sport
2007 BRAKES Parking Brake System - MX-5 Miata