Mazda MX-5 Miata Sport 2007 Manual page 1691

2006-08 engine
Table of Contents

Advertisement

Courtesy of MAZDA MOTORS CORP.
OIL FILTER REPLACEMENT [LF]
WARNING:
CAUTION:
1. Remove the oil filter using a commercially available, cup-type oil filter wrench (76 mm {3.0 in}
diameter, 15 sided).
2. Use a clean rag to wipe off the mounting surface.
3. Apply clean engine oil to the gasket of a new oil filter.
4. Tighten the oil filter using a cup-type oil filter wrench and according to the instruction on the package or
side of the oil filter.
Tightening torque (reference value)
15-20 N.m {1.6-2.0 kgf.m, 11-14 ft.lbf}
2007 Mazda MX-5 Miata Sport
2007 ENGINE Lubrication [LF] - MX-5 Miata
Hot engine and engine oil can cause severe burns. Turn off the
engine and wait until it and the engine oil have cooled.
A vehicle that is lifted but not securely supported on safety stands is
dangerous. It can slip or fall, causing death or serious injury. Never
work around or under a lifted vehicle if it is not securely supported
on safety stands.
Continuous exposure to USED engine oil has caused skin cancer in
laboratory mice. Protect your skin by washing with soap and water
immediately after working with engine oil.
In case you spill engine oil on the exhaust system, wipe it off
completely. If you fail to wipe the spilled engine oil, it will produce
fumes because of the heat.

Advertisement

Table of Contents
loading

Table of Contents