Base Installation - Mazda MX-5 Miata Sport 2007 Manual

2007 ACCESSORIES & BODY, CAB Glass/Windows/Mirrors - MX-5 Miata
Fig. 71: Identifying SST
Courtesy of MAZDA MOTORS CORP.
3. Saw through the sealant to remove the base.

BASE INSTALLATION

1. Cut away all of the original sealant using a razor.
WARNING:
2. Clean and degrease the ceramic coating on the glass and the base.
CAUTION:
3. Apply primer to the bonding area of the glass and the base.
4. Use only glass primer on the glass, and body primer on the base. Allow the primer to dry for approx. 30
min.
5. Apply 3.0 mm {0.12 in} layer of sealant to the base.
2007 Mazda MX-5 Miata Sport
the SST (piano wire) to prevent it from breaking. Do not pull too hard
to prevent damage to windshield.
Using a razor with bare hands can cause injury. Always wear

gloves when using a razor.
Keep the area free of dirt and grease, and do not touch the

surface. Otherwise, the primer may not properly bond to the
surface of the glass.