Mazda MX-5 Miata Sport 2007 Manual page 1900

4. Remove the under cover. (MT) (See TRANSVERSE MEMBER REMOVAL/INSTALLATION .)
5. Remove the clutch release cylinder with the pipes still connected. Position the clutch release cylinder so
that it is out of the way. (MT) (See TRANSMISSION REMOVAL/INSTALLATION [M15M-D] .)
(See TRANSMISSION REMOVAL/INSTALLATION [P66M-D] .)
6. Remove in the order indicated in Fig. 2 .
7. Install in the reverse order of removal.
Fig. 2: Identifying Removal Order Of Starter (With Torque Specifications)
Courtesy of MAZDA MOTORS CORP.
STARTER INSTALLATION NOTE
NOTE:
If there is peeling on or damage to the insulator, attach a new insulator

using the following procedure:
1. Peel off the insulator from the starter completely using a scraper.
2007 Mazda MX-5 Miata Sport
2007 ENGINE Starting System - MX-5 Miata