Trunk End Trim Removal/Installation - Mazda MX-5 Miata Sport 2007 Manual

3. Install in the reverse order of removal.
Fig. 53: Identifying Partition Board
Courtesy of MAZDA MOTORS CORP.

TRUNK END TRIM REMOVAL/INSTALLATION

1. Remove the fasteners.
2. Disconnect the trunk compartment light connector.
3. Disconnect the trunk rid cancel switch connector.
4. Remove the trunk end trim.
5. Install in the reverse order of removal.
2007 Mazda MX-5 Miata Sport
2007 ACCESSORIES & BODY, CAB Interior Trim - MX-5 Miata