Mazda MX-5 Miata Sport 2007 Manual page 2120

2007 ACCESSORIES & BODY, CAB Glass/Windows/Mirrors - MX-5 Miata
Fig. 54: Removing Clip D
Courtesy of MAZDA MOTORS CORP.
REAR WINDOW GLASS INSTALLATION NOTE
Rear window glass or middle roof panel is newly replaced
1. Adjust the rear window glass and middle roof panel gap and height difference so that it is within the
specification. (See POWER RETRACTABLE HARDTOP ADJUSTMENT .)
Rear window glass or middle roof panel is reused
1. Install the shim according to the number verified prior to removal.
2. Align the alignment marks applied before the rear window glass removal, install the rear window glass,
and then remove the masking tape.
3. Refer to POWER RETRACTABLE HARDTOP ADJUSTMENT and verify that the gap and height
difference between the rear window glass and middle roof panel are within the specifications. Adjust the
power retractable hardtop if necessary. (See POWER RETRACTABLE HARDTOP
ADJUSTMENT .)
REAR WINDOW DEFROSTER FILAMENT INSPECTION
1. Turn the ignition switch to the ON position.
2. Turn the rear window defroster switch on.
CAUTION:
2007 Mazda MX-5 Miata Sport
Directly touching the rear window defroster filament with the

lead of the voltmeter could damage it. Wrap aluminum foil
around the end of the lead and test the rear window defroster
filament by touching it with the foil.