Mazda MX-5 Miata Sport 2007 Manual page 1866

Fig. 15: Installing Dust Boot To Ball Joint Using SST
Courtesy of MAZDA MOTORS CORP.
REAR LATERAL LINK (LOWER) INSPECTION
1. Remove the rear lateral link (lower) from the vehicle. (See REAR LATERAL LINK (LOWER)
REMOVAL/INSTALLATION .)
2. Inspect the link for bending or damage. If there is any malfunction, replace the link.
3. Inspect the ball joint for looseness. If there is any malfunction, replace the ball joint.
4. Rotate the ball joint 5 times.
5. Measure the ball-joint rotational torque using an Allen wrench and a torque wrench.
Rear lateral link (lower) ball joint rotational torque
0.4-2.8 N.m {5-28 kgf.cm, 4-24 in.lbf}
If not within the specification, replace the rear lateral link (lower). (See REAR LATERAL LINK

(LOWER) REMOVAL/INSTALLATION .)
2007 Mazda MX-5 Miata Sport
2007 SUSPENSION Rear Suspension - MX-5 Miata